The unit is rated 150kW, 400V/3ph, 230v/3ph, 230V/single phase 50Hz. The rated capacity can be achieved continuously at the following extremes of site conditions:
- Ambient temperature 40°C max
- Humidity up to 100%
The load bank is packaged in a sheet steel IP55 enclosure suitable for an outdoor operation. It is supplied as a transportable unit with heavy duty swivel castors suitable for movement over level surfaces. The enclosure is complete with lifting eyes in the top corners.
Housed within the IP55 enclosure is all the equipment necessary for the operation of the load module as follows:
- Resistive elements
- Cooling fan
- Load switching contactors
- Copper work
- Control circuit protection
An internal bulkhead provides complete separation of the resistor chamber from the contactor/control section. A cable box with undrilled gland plate is mounted at the air inlet end of the load bank with brass stud type cable terminations for customers load cables. Access to the element chamber is via a cover on one side of the enclosure. Access to the control/switching section is by a similar arrangement located on the opposite side. The equipment is supplied with a full gloss, white, electrostatically applied, oven baked, polyester powder coating giving a durable, water repellent, heat resistant, UV light stable finish.
Please email us for pricing on the Crestchic 150kW.